The pump curve of a heating pump displays the feed rate on the x-axis and the delivery head on the y-axis.
The dry running alarm is triggered if the motor is running and the flow rate is less than 0.07 m³/h and the pressure is lower than the pressure set on the pressure switch.
The number of switching cycles is unlimited, as the SQ/SQE is equipped with soft start integrated into the motor.
The dynamic total delivery head is also referred to as the
A: Circulator pumps are generally used to circulate hot water.
Dry running of the pump can damage the mechanical seal and the motor.
No, this is not possible...
Yes, that is possible.
In order to increase the service life of both pump and motor, weather protection should always be provided.
No, this is not permitted...