De-energise the pump. Remove the screw in the centre of the nameplate. The shaft located beneath this has a groove.
SQ pumps have integrated dry-running protection that does not require a corresponding level sensor.
As an installer, you have the choice of ordering Grundfos customer service from your specialist wholesaler or of contacting us directly.
Before installing the underwater cable on the motor, you need to make sure that the cable plug is clean and dry.
In the case of non-regulated fixed speed pumps, an overflow valve limits rising pressure when closing the radiator thermostat by moving the medium from the flow pipe to the return pipe.
The pump reacts to changing volume flows in the system by changing the speed.
The pump is running sluggishly or not at all.
Night set-back is activated (if configured to do so) through the feed temperature of the heat generator.