Flanges and seals need to be ordered separately. The type and size of the flanges and seals must be specified when ordering.
Grundfos offers numerous speed-controlled pumps that are referred to as ‘E-pumps’ and which come equipped with Grundfos MGE motors with an integrated frequency converter.
SP submersible pumps with a Grundfos or other submersible motor can be operated in any position from horizontal to vertical.
Possible cause of fault There is medium flowing through the pump and turning the impeller.
If excess temperature protection is not properly connected or bridged, the pump may be permanently damaged.
Yes, the pump has an integrated soft start feature in order to reduce start-up current, thus assuring even, continuous acceleration.
In order to protect against frost damage during transport and storage, SP pumps are protected by a water/glycol mixture.
VDI Guideline 2035 Part 1 has been in effect since 2005, and VDI Guideline 2035 Part 2 has been in effect since 2009.
In the event of a fault, the SQ will perform an unlimited number of restart attempts.